Re-Design

Re-design
Scan2BIM – 3D Model & 3D Laser Scan for Re-design

Summary Scan2BIM Re-design – Severn Partnership were commissioned to 3D laser scan and produce a 3D model of a student accommodation block to allow for re-design & asset management. Overview As there were no current up-to-date accurate plans of the building, our Scan2BIM team were commissioned to create a 3D model using the scan data captured. The 3D model allowed … Continued

3D Laser Scanning, Railway Depot
Scan2BIM – Railway Depot, 3D Laser Scanning

Summary Severn Partnership were instructed to carry out a full 3D laser scan of a number of bays at a Railway Depot. The client wanted to capture columns, trusses, horizontal and vertical bracing, cladding rails, purlins, connection details and bolt sizes. This information was utilised to make structural assessments and assist with the re-design of the structure. … Continued

Survey
BIM4Refurb – Laboratory 3D Laser Scan Survey

Summary BIM4Refurb Survey Laser scanning and 3D modelling of a derelict listed building to enable detailed design. Overview Severn Partnership were commissioned by Zetica to 3D laser scan and produce a 3D CAD model for a derelict building due to be refurbished into a laboratory and offices. The survey was undertaken whilst the site was being … Continued

BIM4Refurb - 3D Laser Scanning Cinema
BIM4Refurb – 3D Laser Scanning of a Cinema

Summary BIM4Refurb – Laser scanning used for re-design of a Midlands based cinema, taking into consideration acoustic and visual factors. Overview Our Scan2BIM team were commissioned by a local architectural practice to scan 14 cinemas and produce 2D sections and floor plans for each auditorium. By utilising the scan cloud designers can consider all noise, vibration, … Continued

Scan2BIM - Educational
Scan2BIM – Radbrook Campus (BIM 4 Educational Facilities)

Overview The Scan2BIM team at Severn Partnership were commissioned by a local Architectural Firm to carry out a 3D laser scan of the old Radbrook College Campus based in Shrewsbury. The site is proposed to accommodate over 100 houses and 20 flats. The main college building which opened in 1898 along with two additional properties must … Continued

Scan2BIM - Measured Survey Wolverhampton University
Scan2BIM – Measured Survey of Wolverhampton University

Summary Severn Partnership were asked to provide a measured survey of a derelict building within the old Springfield Brewery, Wolverhampton. The survey was used to create a 3D model, which was utilised by Tweedale Architects to provide a new design for the proposed University building. Project Overview The University of Wolverhampton are investing in a … Continued